Rooftop Solar Panel Installation in Gurugram for Homes & Villas

DHBVN — Dakshin Haryana Bijli Vitran Nigam — permits grid-connected rooftop solar up to 100% of your sanctioned load. We file the application on the DHBVN portal, an engineer carries out a feasibility check, and once the plant is commissioned a bi-directional meter is installed. Units your panels export during peak sun hours are credited against your night-time grid consumption, so self-consumption is always settled first.

Gurugram falls in Haryana, which operates no state-level rooftop solar subsidy. The entire incentive is the central PM Surya Ghar payment: ₹30,000 per kW up to 2 kW, ₹18,000 per kW up to 3 kW, capped at ₹78,000. That cap applies regardless of system size, so a 5 kW or 10 kW system still receives ₹78,000. This is worth knowing when comparing Gurugram quotes against Delhi, where a separate state capital subsidy can take a 3 kW system to ₹1,56,000 combined.

A 5 kW system costs approximately ₹3,35,000 installed before subsidy. After the ₹78,000 PM Surya Ghar payment, the net cost is around ₹2,57,000. It generates roughly 600 units a month, which against DHBVN upper-slab tariffs of about ₹7.5 per unit typically saves ₹3,000 to ₹6,000 monthly and recovers the outlay in roughly 3.5 to 4.5 years.

Yes, largely. Society DG backup in Gurugram typically runs at ₹25 to ₹35 per unit, several times the grid tariff. A hybrid system with lithium battery storage runs essential daytime and night loads directly on solar, removing most of that per-unit charge from the monthly bill. For whole-society common-area loads, a larger array without storage is usually sufficient.

Around 30 to 40 working days from application to a commissioned net meter, which is the fastest approval timeline in the NCR. Within that: a DHBVN feasibility visit typically lands within 7 to 10 days, physical installation and commissioning takes 2 to 4 days, and bi-directional meter installation and synchronisation takes a further 10 to 15 days.

For terraces where you want to keep the rooftop usable, we design hot-dip galvanised elevated pergola structures that raise the panels 8 to 10 feet above the terrace. On RCC slabs we use standard ballasted mounting with wind-load engineering sized for Haryana's wind profile. A pre-installation shadow analysis comes first, because DLF and Golf Course Road properties are often partially shaded by neighbouring towers.